Cut steel faster, cleaner and easier. Save time, money and the environment.

The complete series of steel cutting saw blades called “Steel-Pro” makes light work out of all kinds
of mild steel: steel studs, steel sheet, steel pipe, channel, threaded rod and much, much more.

Specially formulated C-6 carbide grade resists breakage on impact and lasts longer — much longer
than standard carbides or abrasive discs.

Special tooth geometry with “inserted” tooth design greatly improves efficiency and durability

Abrasive discs throw sparks and lots of dust, the Steel-Pro blades reduce spark production and
eliminate abrasive wheel dust.

Abrasive discs wear quickly, requiring frequent blade changes. Steel-Pro blades allow you to keep
working, eliminating down time for frequent blade changes. In addition, Steel-Pro cuts much faster.

Abrasive discs leave a burr at the cutting edge that must be removed later — the Steel-Pro blades
cut clean, eliminating this after cut process.
Each Blade Features:
Super-flat plates and specially formulated carbide tips with a special tooth grind that gives
     fast, clean cuts.
 High quality cuts without the clouds of dust and scorch marks associated with friction blades.
 Cool cuts that leave the workpiece edge free of burrs.
 Reduced cost per cut and maximized performance for the operator as a result of fewer
     blade changes.
Steel-Pro Select the next generation of
steel-cutting carbide-tipped blades
These blades are designed to be quieter than standard steel-pro blades and will last longer as well.

The Steel-Pro Select blades allow you to cut a wide variety of mild steel material with:
NO DUST CLOUDS    REDUCED SPARKING    MUCH LESS NOISE
 LESS BURR ON EDGES    FEWER BLADE CHANGES
Each Blade Features:
 Each Blade Features:
 Exclusive two-ply blade body for self dampening and low noise operation
 Individually hammer-tensioned steel plates for true run
 Unique tooth design and geometry for smoother and easier cuts
 Inserted teeth with chip limiting steel support for added durability and safety
 Tough C-6 carbide for impact resistance and long cutting life

Steel-Pro Select blades, when used for the proper application, will save lots of time and can outlast
abrasive discs up to 30 to 1. Please note all safety instructions before use and adhere to instructions
for maximum rpm speeds.
Steel-Pro & Steel-Pro Select
Model
Dia.
Teeth
Arbor
Grind
Kerf
Rake
 Application
FOB KY
PRF-15238
6"
38
1/2"
MTCG
.079"
0
 For cordless or corded saws.
$60
PRF-16048
61/4"
48
5/8"KO
MTCG
.079"
0
 For cordless or corded saws.
$60
PRF-18538BW
71/4"
38
5/8"KO
ATB
.079"
0
 Our Steel-Pro for cutting ferrous metal up to 1/4" thick.
$60
PRF-18538BW2
71/4"
38
20mm
ATB
.079"
0
 NEW!
$60
PRF-18538DS
71/4"
38
5/8"KO
TCG
.079"
0
 Steel-Pro Select for ferrous metal up to 1/4" thick.
$80
PRF-18548BW
71/4"
48
5/8"KO
ATB
.079"
0
 Our most popular Steel-Pro. Cuts thick (up to 1/8")
and thin.
$60
PRF-18548BW2
71/4"
48
20MM
ATB
.079"
0
 NEW!
$60
PRF-18548DS
71/4"
48
5/8"KO
TCG
.079"
0
 Steel-Pro Select for ferrous metal up to 1/8" thick.
$80
PRF-18570CB
71/4"
56
5/8"KO
ATAF
.069"
-10
 NEW!.
$66
PRF-18570CBN
71/4"
70
5/8"KO
ATB
.069"
-10
 For cutting very thin steel. (Steel sheet, corrugated
steel sheet, etc.).
$70
PRF-18570BW2
71/4"
70
20MM
ATB
.069"
-10
 NEW!
$70
PRF-21048BW
81/4"
48
5/8"KO
MTCG
.087"
0
 The 81/4" Steel-Pro for ferrous metal cutting with circular saws.
$80
PRF-25550D
10"
50
1", 5/8"
TCG
.098"
0
 For 10" circular saws and low RPM saws for ferrous
metal.
$110
PRF-25550DS
10"
50
1", 5/8"
TCG
.091"
0
 Steel-Pro Select for quiet cuts in mild steel.
$140
PRF-30560D*
12"
60
1"
TCG
.098"
0
 For cutting mild steel on low RPM dry cut saws.
$118
PRF-30560DS*
12"
60
1"
TCG
.094"
0
 Steel-Pro Select for low vibration cuts in mild steel.
$140
PRF-30580BWS*
12"
80
1"
MTCG
.094"
-5
 Steel-Pro Select for low vibration cuts in mild steel
(thin stock).
$220
PRF-35572D*
14"
72
1"
TCG
.094"
0
 For use on dry-cut low RPM saws for cutting mild
steel.
$198
PRF-35572DS*
14"
72
1"
TCG
.094"
0
 Steel-Pro Select for low vibration cuts in mild steel.
$198
PRF-35590BWS*
14"
90
1"
MTCG
.094"
0
 Steel-Pro Select for low vibration cuts in mild
steel (thin stock).
$240
PRF-40580D*
16"
80
1"
TCG
.102"
0
 For use on low RPM saws for cutting mild steel.
$500
*These blades are for use on low RPM chop saws only.
Questions or Orders —
Call  800/922-0977   8am – 4pm Pacific Time