BLADES for ZETZ-9 and
ZETZ-24 THERMOCUTTERS
Choose the blade to suit the purpose. These blades are designed so that heat is concen-trated along the cutting edge in order to achieve the optimum cutting temperature. Prior to insertion in the material to be cut, the temperature of the blades will be between 100°C and 800°C, depending on the type of blade and the thermocutter used. The temperature to the blade cools down as it enters the material. The temperature depends on the thermal pro-perties and heat conductivity of the material being cut and determines the cutting speed. The cutting edge is evenly heated because of the design of the blade's cutting flanges.
Model T 3  These are the most commonly used blades.
Blades
Thickness
Cutting Edge Length
T 3/15
0.6 mm
15 mm
T 3/30
0.6 mm
30 mm
T 3/50
0.6 mm
50 mm
T 3/90
0.6 mm
90 mm
T 3/125
0.6 mm
125 mm
Pricing and Purchase of T 3 Blades available on Abbeon.com.
Model T 2 sharpened on two sides to prevent distortion, allows cutting in two directions. Ideal for cutting foam.
T 2/50
0.6 mm
50 mm
T 2/100
0.6 mm
100 mm
T 2/150
0.6 mm
150 mm
T 2/200
0.6 mm
200 mm
Pricing and Purchase of T 2 Blades available on Abbeon.com.
Model T 11 with angled cutting edge and a parrot's beak to serve as a guide hook.
T 11/15
0.6 mm
15 mm
T 11/30
0.6 mm
30 mm
Pricing and Purchase of T 11 Blades available on Abbeon.com.
Model T-4 snub nosed design allows for concentrated heat at the tip.
T-4
0.6 mm
30 mm
Pricing and Purchase of T-4 Blades available on Abbeon.com.
Model T 015 blades listed below are spade shaped to be held verically. Suitable for mounting installations.
T 015/.6
0.6 mm
35 mm
T 015/.8
0.8 mm
35 mm
T 015/1.0
1.0 mm
35 mm
Back to ZETZ-9
Back to ZETZ-24
Pricing and Purchase of T 015 Blades available on Abbeon.com.
Examples of uses for blade numbers— T-2, T-3, T-11, T-01, T-02,
       T-04, T-05, T-06, T-10, T-08, T-015, T-011, T-012, T-013, V-1
Cutting and de-burring of:
• Natural and synthetic rubber
• Rubber sheets 30-80 Shore
• Rubber with textile
• PVC boards, foils and sheets
• Cutting off and heat sealing fabric piles, industrial tubings, profile gaskets.
• Car trim and upholstery, cutouts in instrument panels.
• Roof and wall insulation boards up to 125 mm thickness of foam PE, PS, PU.  No gap, no cold bridge.
• Cutting out silicone gaskets for construction joints.
• Floor and wall claddings, including bituminous materials.
• Stress-free cutting of profile gaskets of PVC and Neoprene rubber for window and door frames.
• Clean cuts for subsequent welding or gluing.
• Electrical installations like conduit and trunking channels. Insulating cables and leads.
Model T 01 with glide hooks that hook into the material and glides  along cutting base. T 02S0 is offset at 90° angle.
Blades
Thickness
Cutting Edge Length
T 01
0.6 mm
6 mm
T 02
0.8 mm
12 mm
T 02S0
1.0 mm
12 mm
Pricing and Purchase of T 01 Blades available on Abbeon.com.
Model T 04 with short, obtuse angled cutting edges, both sides are ground.
Blades
Thickness
Cutting Edge Length
T 04
0.6 mm
15 mm
Pricing and Purchase of T 04 Blades available on Abbeon.com.
Model T 05 with wide blade back and reinforced cutting flange. Stable cutting. The high temperature blade is designed for heat   sealing the cutting edges.
Blades
Thickness
Cutting Edge Length
T 05
0.6 mm
35 mm
Pricing and Purchase of T 05 Blade(s) available on Abbeon.com.
Model T 011 standard blades, double edged, with concave cutting edges leading to a point — For cutting material at an oblique angle and at a high temperature. Can achieve a  small radius on
rounded cuts. Cuts staight into material without preparatory drilling.

De-burring blade for anti-static trimming of excess plastic from sprues without waste or tension cracks.
Blades
Thickness
Cutting Edge Length
T 011/.6
0.6 mm
10 mm
T 011/.8
0.8 mm
10 mm
Pricing and Purchase of T 011 Blades available on Abbeon.com.
Model T 12 with long pointed blade flanges, ground both sides. For two-directional cuts. For cutting around templates. Also suitable for de-burring.
Blades
Thickness
Cutting Edge Length
T 012/.6
0.6 mm
35 mm
T 012/1.0
1.0 mm
35 mm
Pricing and Purchase of T 12 Blades available on Abbeon.com.
Model V-1 used for sheet plastics, asphalt roofing paper, roll stock and any high-heat application— Not designed for continuous use.
Blades
Thickness
Cutting Edge Length
V-1
2.0 mm
15 mm
Back to ZETZ-9
Back to ZETZ-24
Pricing and Purchase of V-1 Blade(s) available on Abbeon.com.
Model T 06  with a rounded edge to glide along cutting surface. Heat  sealing the edges to prevent fraying of synthetic fibers and textiles.
Blades
Thickness
Cutting Edge Length
T 06
0.6 mm
2 mm
Pricing and Purchase of T 06 Blade(s) available on Abbeon.com.
Model T 150  Cutting Sling consists of adjustable arms plus Blade No. T 151 which can be reshaped once. Applications: For rounded, angular, concave and other shaped cuts. Shaping interior spaces, cutting hollows into foam materials such as PE,
PS, PU, etc..
Cutting Sling
Thickness
Cutting Edge Length
T 150
Replacement Blade
.05 mm
Up to 16 mm
Pricing and Purchase of T 150 Blade(s) available on Abbeon.com.
Model Tn 106  Grooving (for use with Cutting Sling) for quick cutting of grooves and flutes in foam materials made of PE, PS, PU.
Blades
Cutting Width
Cutting Depth
Tn 106 16-22 mm 16 mm
Pricing and Purchase of Tn 106 Blade(s) available on Abbeon.com.
Model T 013 & ATL  blades have curved cutting edge and thick blade. High temperature blade suitable for long cuts under pressure. T 013/70 and T 013/115 blades are for use with ZETZ-24 only. ATL Blades are  the same as T013 Blades with the exception  of being offset at a 45° angle.
Blades
Thickness
Cutting Edge Length
T 013/45
0.8 mm
45 mm
T 013/70
1.0 mm
70 mm
T 013/115
1.0 mm
115 mm
ATL/45
0.8 mm
45 mm
ATL/70
1.0mm
70 mm
Back to ZETZ-9
Back to ZETZ-24
Purchase and Pricing of T 013 Thermocutter Blades and ATL Thermocutter Blades available on Abbeon.com.
Blades
Thickness
Cutting
Edge
Length
No. T 08/50
0.8 mm
50 mm
No. T 08/75*
0.8 mm
75 mm
No. T 08/100*
0.8 mm
100 mm
No. T 08/120*
0.8 mm
120 mm
*For use with the ZETZ-24 ONLY.
Purchase and Pricing of T 08 Thermocutter Blades available on Abbeon.com.
With evenly heated cutting edge and thick blade From 50 mm cutting length upwards.

Suitable for thermoplastics with low melting points such as foam polyethylene, polystyrene, polyurethane

Blade T 08 gives a clean cut which allows seamless joining of material in subsequent sealing or gluing operations.

Roof and wall insulation boards up to 120 mm thickness. No gap, no cold bridge.

Cutting profile gaskets of PVC and Neoprene rubber for windows and door frames without crushing the material.
Blades
Thickness
Cutting
Edge
Length
No. T 10
1.0 mm
10 mm
No. T 15
1.0 mm
15 mm
No. T 20
1.0 mm
20 mm
No. T 25
1.0 mm
25 mm
No. T 30
1.0 mm
30 mm
Pricing and Purchase of T 10, T 15, T 20, T 25 and T 30 Blades available on Abbeon.com.
Suitable for thermoplastics with higher melting points such as rubber, synthetic rubber, synthetic resins

Cutting rubber up to 90 Shore combustible, oil resistant rubber.
 Cutting out rubber linings on containers, mixers, vibration and conveyor chutes and troughs.
 Angled cuts at joints on conveyor belts, camelbacks, rubber anti- abrasion coatings.
 Cutting and peeling rubber sectioning belts and flexible PVC (supported or unsupported).

Blades are designed for rapid heating to maximum temperature
The entire cutting edge must be used in the material to obtain full benefit of the heat and to maximize cutting efficiency. Blades are available in 5 cutting lengths and should be chosen according to thickness of material.
Specialty Thermocutter Blades
Uses
Blades Thickness Cutting
Edge
Length
No. SA-1
2.5 mm
5.0 mm
Used for melting
round holes in
plastic and nylon
materials.
Blades
Thickness
Cutting
Edge
Length
No. ATS 10
0.8 mm
10 mm
No. ATS 18
1.0 mm
18 mm
No. ATS 22
1.0 mm
22 mm
Ideal for removal of adhesive material or removal of plastic
flashings. Scoop
design with 1/8" sides.
Blades
Thickness
Cutting
Edge
Length
No. TS 30
1.0 mm
30 mm
Heavy duty blade
designed for removing
plastic/rubber linings inside storage tanks. Scoop design with 3/8" sides. For use with
ZETZ-24 only.
Blades
Thickness
Cutting
Edge
Length
No. ATP 18
1.0 mm
18 mm
No. ATP 22
1.0 mm
22 mm
No. ATP 33
1.0 mm
33 mm
No. ATP 38
1.0 mm
38 mm
No. ATP 40
1.0 mm
40 mm
No. ATP 50
1.0 mm
50 mm
No. ATP 55
1.0 mm
55 mm
Designed for cutting at
offset angles. Suitable for permanent
mounting operations—
sharpened on both
sides. For use with
ZETZ-24 only.
Blades
Thickness
Cutting
Edge
Length
No. DT 50
1.0 mm
50 mm
No. DT 75
1.0 mm
75 mm
No. DT 100
1.0 mm
100 mm
No. DT 125
1.0 mm
125 mm
No. DT 150
1.0 mm
150 mm
No. DT 175
1.0 mm
175 mm
No. DT 200
1.0 mm
200 mm

Blades for cutting insulating material. Thick blade for controlled cutting, with constant temperature along the cutting edge. Blades available in 7 lengths, should be chosen according to thickness of material. For a length of more than 100 mm, use only on ZETZ-24.

For anyone using foam insulation such as contractors, painters, interior fitters, insulating specialists.
 Roof and wall insulation boards up to 200 mm thickness made of PE, PS, PU.
 Quick and neat joining and fitting of insulation boards. Cutting time for 1 m long, 150 thick insulation board is 8 seconds.

Pricing and Purchase of Specialty Blades available on Abbeon.com.
Questions or Orders—
Call  800/922-0977   8am – 4pm Pacific Time