Bend plastic without
contacting the heat source

Ideal for making single bends or making your own system
Free-Standing Heating Trays
Bend Plastics to Perfection
             
 The heating element is recessed and never comes in contact with your plastic. The result is a professional bend every time.

These heating trays have been exclusively designed to give constant professional bends while working with all types of thermoplastic materials. Acrylics, ABS, PVC, CPVC, Polypropylene, Polyethylene, Polycarbonate and many more. They are essentially used for straight line bends or folds, capable of heating up to 1/2" thick material. All trays come with a standard 120-volt pigtail and are ready for operation.

Multiple units may be purchased for multiple bends or to build your own system. The temperature of two heating trays can be controlled with the PC-10 Power Control (see below).

All Free-Standing Heating Trays run on standard 120-volts and have a maximum operating temperature of 800°F. Temperature can be adjusted using the PC power control.
Model
FS-24
FS-48
FS-48/4
FS-72
FS-96
FS-48W2
FS-3/48
FS-3/48/4
Heated Width/Length
1/2" x 24"
1/2" x 48"
1/4" x 48"
1/2" x 72"
1/2" x 96"
2" x 48"
* x 48"
* x 48"
Total Length of Tray
35"
59"
59"
83"
107"
59"
59"
59"
Watts/Amps
220/1.8
430/3.6
330/2.75
525/4.4
880/7.4
860/7.2
860/7.2
660/5.40
"A" Dimension
1/2"
1/2"
1/4"
1/2"
1/2"
2"
1/2"
1/4"
Pricing and Purchase on Abbeon.com
*Dual elements with 1" minimum center-to center on 1/2" elements and 3/4" minimum on 1/4" elements.

Replacement Elements

Model
11008
11007
11009
9958
11006
11007
11007
 11009
Pricing and Purchase on Abbeon.com.

AEC-15 Controller for Heat Trays

  • Solid state microprocessor
  • On/Off switch
  • Power indicator light
  • Power adustment knob
  • Low voltage indicator
  • Dual outlet
  • 20 volts, 15 amps



This robust power controller uses a digital microprocessor for overload protection. If the controller senses an overload, it will automatically limit the current flow to 15 amps and warn you with the indicator light. This unit also has a low voltage indicator light that tells you if your supply voltage drops below 100 volts. Comes with an anodized aluminum housing and internal cooling fan. The AEC-15 can also be used for some hot wire applications.

Model AEC-15 Controller for Heat Trays

Pricing and Purchase available on Abbeon.com

Questions or Orders —
Call  800/922-0977   8am – 4pm Pacific Time