 |
||||||||
|
||||||||
 |
Bend plastic without
contacting the heat source
Ideal for making single bends or making your own system
Free-Standing Heating Trays
Bend Plastics to Perfection
contacting the heat source
Ideal for making single bends or making your own system
Free-Standing Heating Trays
Bend Plastics to Perfection
The heating element is recessed and never comes in contact with your plastic. The result is a professional bend every time.
These heating trays have been exclusively designed to give constant professional bends while working with all types of thermoplastic materials. Acrylics, ABS, PVC, CPVC, Polypropylene, Polyethylene, Polycarbonate and many more. They are essentially used for straight line bends or folds, capable of heating up to 1/2" thick material. All trays come with a standard 120-volt pigtail and are ready for operation.
Multiple units may be purchased for multiple bends or to build your own system. The temperature of two heating trays can be controlled with the AEC-15 Power Control
(see below).
All Free-Standing Heating Trays run on standard 120-volts and have a maximum operating temperature of 800°F. Temperature can be adjusted using the PC power control.
| Model | FS-24 | FS-48 | FS-48/4 | FS-72 | FS-96 | FS-48W2 | FS-3/48 | FS-3/48/4 |
| Heated Width/Length | 1/2"x24" | 1/2"X48" | 1/4"X48" | 1/2"X72" | 1/2"X96" | 2"X48" | * x 48" | * x 48" |
| Total Length of Tray | 35" | 59" | 59" | 83" | 107" | 59" | 59" | 59" |
| Watts/Amps | 220/1.8 | 430/3.6 | 330/2.75 | 525/4.4 | 880/7.4 | 860/7.2 | 860/7.2 | 660/5.40 |
| "A" Dimension | 1/2" | 1/2" | 1/4" | 1/2" | 1/2" | 2" | 1/2" | 1/4" |
| *Dual elements with 1" minimum center-to center on 1/2" elements and 3/4" minimum on 1/4" elements. | ||||||||
| Replacement Elements | ||||||||
| Model | 11008 | 11007 | 11009 | 9958 | 11006 | 11007 | 11007 | 11009 |
| Pricing and Purchase here on Abbeon.com. | ||||||||
- Solid state microprocessor
- On/Off switch
- Power indicator light
- Power adustment knob
- Low voltage indicator
- Dual outlet
- 20 volts, 15 amps
This robust power controller uses a digital microprocessor for overload protection. If the controller senses an overload, it will automatically limit the current flow to 15 amps and warn you with the indicator light. This unit also has a low voltage indicator light that tells you if your supply voltage drops below 100 volts. Comes with an anodized aluminum housing and internal cooling fan. The AEC-15 can also be used for some hot wire applications.
Pricing and Purchase on 120V Heat Tray Controller here on Abbeon.com.
Questions or Orders —
Call 800/922-0977 8am – 4pm Pacific Time
Call 800/922-0977 8am – 4pm Pacific Time
|
|||||||||
|
|||||||||
|
