T2000S Multifunctional Measuring Instruments

The digital technology avoids the drifting that occurs with analog devices!

The T2000 automatically detects which sensor is attached when the SDI sensors are changed.
Minimum, maximum, average and hold values
 Calibration Settings
 Thumbwheel enables simple one-handed operation
 Rugged, compact housing
 Attractive price/performance ratio
 Large back-lit display

Instrument users include:
Installers of sanitary systems
 Installers of heating systems
 Flooring professionals
 Housing Administrators
 General and restoration contractors
 Mold remediation specialists
 Air temperature
 Air velocity
 Surface temperature
 Relative humidity
 Absolute humidity
 Material moisture
 Dew point
T2000S Multifunctional Measuring Instrument

A “real” multifunctional measuring instrument for material and building diagnosis:
reliability
flexibility
security of investment
Digital precision . . .

The heart of the T2000 is a 24-bit analog/digital converter which supplies long-term stable, precision results which analog instruments cannot achieve even in a rough environment.

The digital technology of the “Serial-Digital-Interface” (SDI) opens up a new dimension in flexibility in measuring ability for the user. Start with a T2000 with one probe and purchase other sensors as needed.

With the T2000 you have one single measuring instrument for many tasks instead of many instruments for one task!
#T2000S Moisture Meter
Pricing and Purchase available on Abbeon.com.
For the moisture measurement in buildings the T2000 offers 3 different methods—

1.) Hygrometric method:
Measuring the relative humidity in construction materials by using the climate sensors TS200 SDI with 12 mm diameter or TS240 SDI with 4 mm diameter only (especially for measurement in holes drilled into joints).

2.) Capacitive and microwave method for raster scanning:
Non-destructive measuring of moisture distributions up to 4 cm away from the surface by using the TS300 SDI probe and measuring moisture distributions up to 20 - 30 cm away from the surface using the TS350 SDI probe.

3.) Resistance method:
Measuring the electrical resistance between two electrodes inserted into the material (construction material or wood) using electrode probes (only available for the T2000S model).

For Temperature measurements such as surface, insertion and immersion:
Both T2000 models accept Trotec PT100 sensors as well as non-Trotec sensors and thermocouples with an adapter cable.

For Airflow speed and Temperature measurements,
SDI anemometer sensors are available.
Connection options for T20000S model:
The T2000S is fitted with a 5 pin plug connector to which you can attach Trotec SDI and Pt100 sensors.
Use the 5pm plug connector (A)for:
Trotec SDI sensors with TC30 SDI connecting cable
Trotec Pt100 sensors (5-pin plug connector usually integrated)
Non-Trotec sensors* with TC10 adapter cable

The T2000S also has a BNC input which supports the connection of electrodes for building and wood moisture measurement according to the resistance principle (Ohm’s Law).


T2000S Connection to BNC input (B) for:
Passive Trotec wood and building moisture sensors with
TC20 connecting cable
Non-Trotec sensors* with TC20 adapter cable
* Info available on request

A Full Range of sensors and electrodes:
SDI Sensors
Climate measurement
Climate measurement

Air temperature and air velocity

TS 200 SDI–
climate sensor

For measuring air temperature and humidity. Relative humidity (r. h.), absolute humidity (g/m3), air temperature (°C, °F) and dew point temperature (dp °C, dp °F) are determined.

Temperature and humidity measured values are shown simultaneously in real time on the display of the T2000.

Minimum, maximum, average and “hold” values can be displayed optionally in addition to the measured value.

Since there is frequently a heavy accumulation of dust and dirt under practical conditions which can lead to falsification of the measuring results and shortening of the sensor life, the TS 200 SDI 1 is already equipped with a metal grid filter as a standard (measurement range -20 to 70 °C; 0 to 98 % r. h.).

#TS200
Pricing & Purchase available on Abbeon.com.

Moisture measurement

Surface moisture

TS 300 SDI –
capacitive moisture sensor

The area of application of the TS
300 SDI 5 is in the non-destructive determination of moisture distributions in areas up to 4 cm away from the surface (measurement range 0…200 digit).

The TS 300 SDI can display average, minimum, maximum and “hold” values.

#TS300  
Pricing and Purchase available on Abbeon.com.

Alarm function
Additionally an individual alarm limit
can be defined with both moisture
sensors.

Advantage of the alarm function:
Large areas can also be measured
quickly and effectively. The user can
concentrate on the target without
having to watch the measuring results
on the display the whole time.

As soon as the selected limit is exceeded the sensor alerts the user with an acoustic signal!
Pt100 sensors for temperature-measurement

With the Pt100 sensors, minimum, maximum, average and “hold” values can be displayed in the second display in addition to the real time temperature values of solids, bulk goods, liquids, gases or foodstuffs in T2000 measuring applications.

TS 130/150 –surface temperature sensor

The head of the 150 mm long measuring tip (ø 4.5 mm) carries a spring-loaded sensor which picks up the surface temperature.The class B sensor is particularly suitable for use of temperature compensation in determining moisture content of wood. The shape allows accurate determination of the surface temperature.

#TS130150
Pricing and Purchase available on Abbeon.com.

Electrodes:
6 TS4/300 round electrodes: Very thin insertion electrodes (uninsulated, 0.2 mm, Diameter 2 mm, Length 200 mm or 300 mm) for moisture measurement in building and insulating materials through joints or cross joints.
#TS4300

8 TS16/300 flat electrodes: The advantage of the flat electrodes (1 mm flat, 200 mm or 300 mm Length) is that there are no holes in the surface and the electrodes can be inserted through the edging strip after removing the base.
#TS16300

9 TS20/110 brush electrode: With 110 mm long brush head (Diameter 7 mm) and insulated shaft. The area of application is the specific measurement of moisture in a homogeneous building material without using a contact mass (the brushes will give a better coupling even in porous materials). The connection to the goods to be measured is made by the brush head.
#TS20110

10 TS50 insertion electrodes: The two-part insertion electrode TS50 enables the variable distance when positioning the electrode pins. The area of application is the measurement of moisture in hard building materials such as concrete or screeds.
#TS050

11 Layer depth electrodes TS 24/250: The area of application is the specific layer moisture measurement in homogeneous building materials using the contact mass. The material humidity can be determined according to the length up to a maximum depth of approx. 250 mm (Diameter 8 mm).                                 #TS24250

12 TS60 hand electrode: Unbreakable plastic handle with two hexagon union nuts in which electrode pins can be inserted. Areas of application are measurement of moisture in cut timber or wooden board materials (e.g. chipboard or fibre boards) and measurement of moisture in soft building materials such as plaster or roughcast mortar.
#TS060

13 TS70 hammer electrode: With moving hammer handle for precision zone and depth measurement especially in woods with different moisture distribution, e.g. liquid nests using tefloncoated electrode pins. These are available in lengths of 45 and 60 mm.                                
#TS070
Connecting Cable BNC#TC20
Connecting Cable SDI Senors #TC30
Unit & Sensor Case  #T9017
Pricing and Purchase available on Abbeon.com.

Electrodes for measuring moisture content of wood and buildings according to the resistance method:
Questions or Orders —
Call  800/922-0977   8am – 4pm Pacific Time